Shenzhen CN Technology Co. Ltd..
Customer satisfy is eternal pursue of corporation Responsbility is the assurence of quality, Quality is life of corporation
Add to Cart
CNSMT SUPPLY HELLER 1809MKIII 1809EXL Used reflow oven 9zone heats 2 cool zone
CNSMT SUPPLY HELLER 1809MKIII 1809EXL Used reflow oven 9zone heats 2 cool zone
keyworkds
Part name:HELLER REFLOW OVEN
MODEL: 1809MKIII 1809EXL
SMT REFLOW OVEN
SMT PCB SOLDER REFLOW
SMT FULL AUTOMATIC REFLOW OVEN
HELLER 9HEAT ZONE LARGE SIZE REFLOW OVEN
| HELLER reflow 1809EXL specifications: |
| 1.Heating zone / cooling zone: |
| Number of heating zones: upper 9 / lower 9 (both above and below the IR furnace) |
| Heating zone length: 2660mm |
| Number of cooling zones: 2 |
| 2.Input voltage: |
| 380V three-phase, 50 / 60HZ |
| 3.Specifications: |
| Dimensions: 4650mm long X1371mm wide X1600mm high |
| Weight: 1588 kg (air furnace) (nitrogen furnace weight depends on previous configuration) |
| 4.Temperature control: |
| Temperature control accuracy: ± 0.1 ℃ |
| Temperature difference across the plate: ± 2.0 ℃ |
| Temperature control range: 25-350 ℃ |
| Heating wire material: Nickel-chromium alloy coil with quick response |
| Start-up heating time: 1-5 minutes (15-20 minutes, nitrogen furnace) |
| Profile switching time: 1-15 minutes (15-20 minutes, nitrogen furnace) |
| 5.PCB board transfer system: |
| Transmission method: mesh belt transmission, chain transmission |
| Transmission speed: 250-1880mm / min |
| Rail high speed: 940mm ± 50mm |
| Mesh belt height: 890mm ± 75mm |
| Allowed board width: 50-508mm (50-380 minutes, nitrogen furnace) |
| 6.Nitrogen operation: |
| Oxygen content in the furnace: 50-1000PPM |
| Required nitrogen flow: 14-28 cubic meters per hour |
| Flux residue treatment: filter-free separation system |
| 7.Computer operating system: |
| Computer specifications: IBM Celeron 1.7GHz or more |
| Display: 15-inch CRT |
| Operating platform: Windows XP |
| HELLER1809MKIII reflow oven specifications: |
| Power input (3-phase) standard: 480 volts |
| Circuit breaker size: 100amps @ 480v |
| Kilowatt: 8.5-10.5 continuous |
| Typical operating current: 20-25amps @ 480v |
| Optional power input available: 208/240/380/400/440/415 VAC |
| Frequency: 50/60 Hz |
| Continuous Zone Open: Standard |
| Single-phase operation: Not available |
| Equipment size: L4650 × W1370 × H1600 (mm) |
| Net weight: 1588kg |
| AMD or Intel Computer: Standard |
| Recipe storage:> 500 |
| Flat-screen display: Standard |
| Windows operating system: Windows XP® |
| Large PCB width: 20 cm (50.8 cm) |
| Space required between PCBs: 0.0 cm |
| Conveyor length loading: 18 cm (46 cm) |
| Conveyor length unloading: 18 cm (46 cm) |
| Heating tunnel length: 105 cm (254 cm) |
| Process gap above mesh belt: 2.3 cm (5.8 cm) |
| Mesh belt spacing: 0.5 cm (1.27 cm) |
| Large conveying speed: 74cm / Min (188 cm / min.) |
| Conveyor direction from left to right: standard |
| Conveyor direction from right to left: optional |
| Conveyor speed control type: closed loop |
| Height from floor-standard: 37.0 cm ± 2.0 cm (94 cm ± 5 cm) |
| Floor height-optional: 32.6 cm + 3.9 cm /-. 4 cm (83 cm + 10 cm / -1 cm) |
| Clearance above the conveyor: 1.15 cm (2.9 cm) |
| Clearance under the conveyor: 1.15 cm (2.9 cm) |
| PCB support foot length: .187 cm (4.75 mm) |
| 3 mm long support pin: optional |
| Small / large board width: 2.0 cm-18 cm (5-45.7 cm) |
| Edge-holding track heater: Not required |
| Power width adjustment: standard |
| Computer-controlled width adjustment: optional |
| Automatic lubrication system: standard |
| Like: 9 |
| Base: 9 |
| Heater type: Instant response open coil |
| Heater material: nickel-chromium alloy |
| Infrared panel heater (for curing): optional |
| Temperature controller accuracy: ± .1 ° C |
| Cross-band temperature tolerance: ± 3.0 ° C |
| Heater power per zone: 6000 watts |
| Temperature range standard: 25-350 ° C |
| High temperature up to 400 ° C: optional |
| High temperature up to 450 ° C: optional |
| Insulation type: Calcium Silicate |
| UV curing: optional |
| Number of cooling zones: 2- (3 optional) |
| Extra cooling area (external): optional |
Contact:
CNSMT Electronics Equipment Co,.LTD
Ms:Lizzy wong
Email:Lizzy@smtlinemachine.com
info@smtlinemachine.com
www.smtlinemachine.com
Mb/whatsapp/wechat:+8615915451009
SKYPE:smtdwx