Shenzhen CN Technology Co. Ltd..
Customer satisfy is eternal pursue of corporation Responsbility is the assurence of quality, Quality is life of corporation
Add to Cart
YV100II YV100XG changed to 1.2 m PCB LED light placement system support 4 feets led pcb 1200mm kit
YV100II YV100XG changed to 1.2 m PCB LED light placement system support 4 feets led pcb 1200mm kit
Specification:
| KM1-M7163-20X A010E1-37W blowing solenoid valve |
| KM1-M7163-21X A010E1-54W Blowing solenoid valve |
| KM1-M7163-30X A010E1-44W vacuum solenoid valve |
| KGA-M7111-H0X A041E1-48W 88X vacuum solenoid valve |
| KM5-M7174-11X AME05-E2-PSL-13W vacuum generator |
| KV7-M7111-B0X A041E1-11-48W nozzle change solenoid valve |
| KM1-M7162-20X A010E1-35W buffer solenoid valve |
| KV8-M7162-20X A010E1-55W buffer solenoid valve |
| KV8-M7162-10X A040-4E1-56W Upper and lower solenoid valve |
| KM1-M7162-11X A040-4E1-54W upper and lower solenoid valve |
| KU0-M3410-41X A010E1-32W Feida station solenoid valve |
| KGA-M37P1-00X G010HE1-5W Feida station solenoid valve |
| KV5-M7121-L0X A040-4E1-50W |
| KV5-M7121-R0X A040-4E1-50W |
| KH2-M7101-00X A040-4E1-3W YTF Head |
| KGA-M7111-G0X A010E1-59W VALVE Blow valve |
| KV8-M7535-01X VALVE camera |
| KGB-M7163-A0X vacuum generator set 37W+44W+13W |
| KV8-M7163-A0X vacuum generator set 37W+44W+13W |
| Part Number: KV8-M8860-00X |
| Accessory Name: Cleaning Tube Assembly |
| Uses: Used to clean the inside of the shaft tube (clean once a month) |
| Applicable to machine model: YV100 & 180 X & Xg Series & YG200 |
| Part Number: KV8-M8870-00X |
| Accessories name: Oil syringe (including 10cc VG32 lubricant) |
| Use: After cleaning the shaft strip, refuel with the oil syringe |
| The nozzle of the nozzle holder. |
| Applicable to machine model: YV100 & 180 X & Xg Series & YG200 |
| Part Number: KM4-M3810-00X |
| Accessories Name: Steel Needle Assembly |
| Uses: Used to clean the dispensing nozzle |
| Suitable for machine models: YV64D, YV100D, HSD-X, HSD-Xg |
| Part Number: KU4-M8590-00X |
| Accessories Name: Light air gun |
| Uses: Air gun used to clean the nozzle |
| Applicable to machine model: Full line series |
| Part Number: KV4-M8890-00X |
| Accessories Name: Ultrasonic cleaner |
| Uses: For cleaning nozzles and helical gears |
| Applicable to machine model: Full line series |
| Part Number: KM8-M34E0-B1X |
| Accessory Name: Feeder Base Correction Tool |
| Uses: Used to check and correct the feeder base |
| Suction position. |
| Applicable to machine model: |
| YV64, YV100, YV100II, YV100IIe, YVL80 |
| YVL88, YV88X, YV88Xg, YV100X |
| YV180X, YV100XT, YV180Xg, YV100Xg, |
| YV100XTg, YG200 |
| Part Number: KM0-M8840-00W |
| Accessories Name: Component Tray |
| Uses: Glass QFP and ceramic component tray |
| Suitable for machine models: from YV series to Xg & YG series |
| Part Number: KJ3-MY010-00W |
| Accessory Name: Safety Probe Calibration Tool |
| Use: Safety probe for correcting feeder float |
| Suitable for machine models: from YV series to Xg & YG series |
| Part Number: KJ3-MJA00-00X |
| Accessory Name: Tool Component Box |
| Use: Strip parts feeder to replace parts and |
| Tool component for calibration. |
| Suitable for machine models: from YV series to Xg & YG series |
| Part Number: KJ3-M34E0-00X |
| Accessory Name: Feeder Suction Position Correction Tool |
| Uses: Calibration tool with monitor for inspection |
| Check and correct the suction position of the feeder.. |
| Suitable for machine models: from YV series to Xg & YG series |
| Part Number: KV8-M8885-A00 |
| Part Name: Vacuum Inspection Tool |
| Use: Used to block the vacuum shaft in the middle of the suction head. |
| In order to check the vacuum in the upper part of the suction head |
| Applicable to machine model: |
| YV100X, 100XT, 180X, YV100Xg, 100XTg, 180Xg |
| YG200 |
| Part Number: KV7-M3823-00X |
| Accessories Name: Level |
| Uses: Flat feet for machine leveling |
| Scale: 0.1mm/M |
| Total length: 100mm |
| Applicable to machine model: Full line series |
| Accessory Number: 12YMVACGAU |
| Accessories Name: Vacuum Value Tester |
| Use: Used to measure the vacuum value of the Ejector Unit |
| Applicable to machine model: Full line series |
| Accessory Number: 12-GGUNSET |
| Accessories Name: Oil Gun |
| Uses: Used in rolling rods and wires that can be oiled with oil guns |
| On the bearing, used with different nozzles and lubricants. |
| Applicable to machine model: 128-2=Grease nipple correspondence table |
| Of Information for Customer |
| Part Number: K48-M3854-00X |
| Accessories Name: Oil Tsui |
| (Fine type is not sealed, 30 degree bending type) |
| Use: It must be used for bending oil nozzles. |
| Applicable to machine model: 128-2=Grease nipple correspondence table |
| Of Information for Customer |
| Part Number: K48-M3857-00X |
| Part Name: Oil Tsui (Standard Hose Type) |
| Uses: Ball screw that must be used for hose type oil nozzle oiling |
| And linear bearings. |
| Applicable to machine model: 128-2=Grease nipple correspondence table |
| Of Information for Customer |
| Part Number: K48-M3851-10X |
| Accessories Name: LRL Lubricating Grease (50g) |
| Uses: For ball screw and linear bearings. |
| Applicable to machine model: Full line series |
| Part Number: KM5-M7122-M00 |
| Accessories Name: Lubricating Grease (White) |
| Uses: For Y-PACKING and O-RING. |
| Applicable to machine model: |
| YV100, YV100II, YV100IIe, YV100X, YV100XT |
| YV180X, YV100Xg, YV100XTg, YV180Xg, YG200 |
| Part Number: KV7-M718H-00X |
| Accessories Name: Lubricating Grease (25g) |
| Uses: Specially used for gears on the F-head of the YV88X. |
| Suitable for machine model: YV88X-F, YV88Xg-F |
| Part Number: K48-M3856-00X |
| Accessories Name: NSA Lubricating Grease (80g) |
| Uses: Specially used for YV180X & Xg series X-axis ball screw. |
| Suitable for machine model: YV180X & Xg |
| Accessory Number: 12YMGPACK |
| Accessories Name: Lubricating Oil (400g) |
| Uses: For ball screw and linear bearings. |
| Applicable to machine model: ALL MODEL |
| Part Number: KV8-M8881-A0X |
| Accessories Name: Cleaning wire fixing handle |
| Use: Recycling and tightening the wire to the handle two |
| End, so to clean the nozzle my pores. |
| Suitable for machine models: from YV series to Xg & YG series |
| Part Number: KV8-M8883-A0X |
| Accessories Name: Wire |
| Use: Cooperate with KV8-M8881-A0X |
| Clean the pores of the nozzle. |
| Suitable for machine models: from YV series to Xg & YG series |
| Part Number: KV8-M88E3-00X |
| Accessory Name: Unlock the shaft-axis meson (E-RING) tool |
| Use: Used to unlock the YV100X on the FNC shaft |
| Tool for the shaft shaft meson on the cam needle shaft. |
| Applicable to machine model: |
| YV100X-F, 100XT-F, 180X-F, 100Xg-F, 100XTg-F, |
| 180Xg-F, YG200 |
| Part Number: KV8-M88E1-00X |
| Accessory Name: A tool that clamps into the town shaft meson (0.8E-RING). |
| Use: Used to re-clamp the town axis meson |
| YV100X on the FNC shaft on the cam needle wheel. |
| Applicable to machine model: |
| YV100X-F, 100XT-F, 180X-F, YV100Xg-F, 100XTg-F |
| 180Xg-F, YG200 |
| Part Number: KV8-M88E2-00X |
| Accessories Name: Metal Guide Wire |
| Use: It is used to guide the cam needle shaft (PIN CAM) |
| Introducing the metal guide wire in the hole of the FNC shaft. |
| Applicable to machine model: |
| YV100X-F, 100XT-F, 180X-F, YV100Xg-F, 100XTg-F |
| 180Xg-F, YG200 |
Packaging & Shipping
Packaging details:VACUUM&WOODENBOX
Delivery time:Within 1~3 working days
Shipment:
1. We ship to world wide
2. Most orders ship within 1~7days after payment
3. Item shipped from china mainland using airmail by EMS, UPS, DHL, TNT or Hong Kong post, we accept the customer’s shipping request
4.100%T/T before shipment OR 30%T/TADVANCE,Banlance 70% before shipment, after we shipped the goods, we will email you the shipping information
5.WE sell and buy used equipmentS long-term
Service:
1. SMT FULL LINE SOLUTION
2. SMT PRINTER,PICK AND PLACE MACHINE,REFLOW OVEN,CONVEYOR,AOI,SPI,LOADER AND UNLOADER SUPPLIER
3. AI INSERT MACHINE, SMT PERIPHERY EQUIPMENT SUPPLIER
4. BUY AND SELL USED EQUIPMENT
5. Manufacuture of SMT FEEDERS AND NOZZLES
6. WE HAVE PROFESSIONAL ENGINEER TEAM
Company Information:
Shenzhen CNSMT Electronics Equipment Co., Ltd. was established in June 2005
1.registered capital of 6 million yuan and more than 60 employees.
2.The company's core personnel of the professional R&D team have 15 years of automated R&D and manufacturing experience.
3.Our company has developed and mass-produced refow oven and wave welding machine at the end of 2010. The machine is the first in the country.
4.The sales volume of products reached more than 200 units in half a year.
5.Our philosophy: integrity, strength first, wholeheartedly for the customer.
6.Our company adhering to the customer first, service-oriented business philosophy,
benign competition, will continue to work hard to learn, so that more customers to use the quality and cheap SMT china high-end equipment, for customers to save labor costs, factory costs.
Business Scope:
1.Buy and sells SMT pick and place machines(YAMAHA JUKI FUJI,SAMSUNG,PANASONIC,,SIEMENS,ASSEMBLON,Mirae, SONY,...
2.SMT Full-auto printer&semi-auto printer
3.SMT reflow oven& wave solder machine
4.SMT loader and unloader
5.SMT conveyor
6.AOI, SPI
7.SMT peripheral equipment.
8.Insert machine
9.Machine spare parts such as feeders nozzles
10.Full line solution service
contact:
CNSMT Electronics Equipment Co,.LTD
Ms:Lizzy wong
Email:Lizzy@smtlinemachine.com
cnsmtline@foxmail.com
www.smtlinemachine.com
Mb/whatsapp/wechat:+8613537875415
SKYPE:live:722d83e2b97a0bf5